Towbar Info

Universal Towing Electrics Kit - Logicon Towing Interface Module + 12N Pre-wired Socket Kit (2m Cable)

Universal Towing Electrics Kit - Logicon Towing Interface Module + 12N/12S Pre-wired Sockets (2m Cable) + Volton Combi Kit

Logicon Towing Interface Module + 13 Pin Pre-wired Socket (2m Cable) + Volton Combi Kit

The Volton Combi Relay has been designed to switch a live 12 volt input feed to supply the supplementary socket on the vehicle’s caravan. This unit stops the drain of the vehicles battery when the ignition is turned off as the relay senses the voltage of the vehicle and switches off. It also switches itself on when the vehicle starts up and reaches the required voltage.

The ZR2500 Logicon Towing Interface prevents any faults on, or the additional load of, the towed unit’s road lights system damaging the towing vehicle’s road lights system. The Logicon Towing Interface is designed to switch power directly from the towing vehicle’s battery/alternator, to the towed unit’s road lights using very small signals from the towing vehicle’s road lights system, without the towing vehicle’s check control sensory systems being adversely affected. The Logicon Towing Interface includes a built in audible device (and C2 output pin) which buzzes when the towed unit’s directional indicators operate, and by following the operational switching instructions the fog light on the rear of the vehicle can be switched off whilst the fog light on the rear of the towed unit is switched on. * multiplexed bulb failure, digital controlled lighting * dual function/complex low voltage lighting systems